Difference between revisions of "Google Authenticator"
Jump to navigation
Jump to search
Michael.mast (talk | contribs) |
Michael.mast (talk | contribs) |
||
| Line 34: | Line 34: | ||
sudo make install | sudo make install | ||
sudo apt install freeradius | sudo apt install freeradius | ||
| − | sed -i 's/^user\ =\ freerad/user\ =\ root/' /etc/freeradius/radiusd.conf | + | sudo sed -i 's/^user\ =\ freerad/user\ =\ root/' /etc/freeradius/radiusd.conf |
| − | sed -i 's/^group\ =\ freerad/user\ =\ root/' /etc/freeradius/radiusd.conf | + | sudo sed -i 's/^group\ =\ freerad/user\ =\ root/' /etc/freeradius/radiusd.conf |
| + | sudo nano /etc/freeradius/users | ||
| + | # | ||
| + | # Deny access for a group of users. | ||
| + | # | ||
| + | # Note that there is NO 'Fall-Through' attribute, so the user will not | ||
| + | # be given any additional resources. | ||
| + | # | ||
| + | #DEFAULT Group == "disabled", Auth-Type := Reject | ||
| + | # Reply-Message = "Your account has been disabled." | ||
| + | # | ||
| + | DEFAULT Group == “CSP-VMWare.GoogleAuth”, Auth-Type := Reject | ||
| + | Reply-Message = “Your account has been disabled.” | ||
| + | DEFAULT Auth-Type := PAM | ||
| + | |||
| + | # | ||
Revision as of 11:34, 18 August 2016
CentOS 7
yum install -y git autoconf automake make libtool pam-devel git clone https://github.com/google/google-authenticator cd google-authenticator/libpam ./bootstrap.sh ./configure ./make ./make install ln -s /usr/local/lib/security/pam_google_authenticator.so /usr/lib64/security/pam_google_authenticator.so yum install freeradius ln -s /etc/raddb/mods-enabled/pam /etc/raddb/mods-available/pam sed -i 's/user = freerad/user = root/' /etc/raddb/radiusd.conf sed -i 's/group = freerad/group - root/' /etc/raddb/radiusd.conf nano /etc/raddb/users
DEFAULT Group == “GG_S_GOOGLE_AUTH_DISABLED”, Auth-Type := Reject Reply-Message = “Your account has been disabled.” DEFAULT Auth-Type := PAM
sed -i 's/^#\ \ \ \ \ \ \ pam/\ \ \ \ \ \ \ \ pam/' /etc/raddb/sites-enabled/default
Comment out all lines in /etc/pam.d/radiusd then add the following
echo auth requisite pam_google_authenticator.so forward_pass >> /etc/pam.d/radiusd echo auth required pam_lsass.so use_first_pass >> /etc/pam.d/radiusd
Ubuntu 16.04 LTS
sudo wget http://download.beyondtrust.com/PBISO/8.0.1/linux.deb.x64/pbis-open-8.0.1.2029.linux.x86_64.deb.sh git clone https://github.com/google/google-authenticator cd google-authenticator/libpam/ sudo apt install dh-autoreconf sudo ./bootstrap.sh ./configure sudo make sudo make install sudo apt install freeradius sudo sed -i 's/^user\ =\ freerad/user\ =\ root/' /etc/freeradius/radiusd.conf sudo sed -i 's/^group\ =\ freerad/user\ =\ root/' /etc/freeradius/radiusd.conf sudo nano /etc/freeradius/users # # Deny access for a group of users. # # Note that there is NO 'Fall-Through' attribute, so the user will not # be given any additional resources. # #DEFAULT Group == "disabled", Auth-Type := Reject # Reply-Message = "Your account has been disabled." # DEFAULT Group == “CSP-VMWare.GoogleAuth”, Auth-Type := Reject Reply-Message = “Your account has been disabled.” DEFAULT Auth-Type := PAM #
