SAMBA Cross-Domain Trust File Server

Purpose

Existing file server is not configured properly. Will be moving this non-critical data to a new server running in AWS. Since I can live with some downtime if needed, it is much cheaper to use a small AWS instance than to use the expensive Windows based file service AWS offers.

Host

Host is t3a.small CentOS7 instance running on EC2. At the time of this writing CentOS8 is not available on the AWS store.
Though not a critical system, it will be holding sensitive data and I want native SELinux.

Config

Work in progress

Packages and Domain

• Prep base OS with automatic updates and a firewall. Make sure to edit the yum-cron config to install security only, and to install updates after downloading.

sudo yum upgrade -y

• Edit /etc/dhcp/dhclient.conf to include domain specific settings, then reboot.

prepend domain-search "domain1.tld", "domain2.tld";
prepend domain-name-servers 192.168.1.100, 192.168.1.101;
sudo reboot -h now

sudo hostnamectl set-hostname smbshare
sudo timedatectl set-timezone America/New_York
sudo yum -y install epel-release yum-cron firewalld
sudo systemctl enable --now firewalld
sudo systemctl enable --now yum-cron
sudo hostnamectl set-hostname myfileserver
sudo reboot -h now

• Install kerberose and related packages, will join later. Don't forget sssd-libwbclient.

sudo yum install -y realmd krb5-workstation oddjob oddjob-mkhomedir sssd samba-common samba-common-tools samba sssd-libwbclient
sudo systemctl enable --now sssd
sudo realm join -U <username> domain1.tld

Disk

• Create partition, mount data disk, create fstab entry. The below is for general reference only and omits finding the UUID and what options to use.

sudo fdisk /dev/nvme1n1
sudo mkfs.xfs /dev/nvme1n1p1
sudo mount /dev/disk/by-uuid/556cfbd6-18cf-4721-934c-f35835ee89c8 /mnt/data/

Apply selinux context.

sudo semanage fcontext -a -t samba_share_t "/mnt/data(/.*)?"
sudo 

Samba Config

SSSD

This process was not working when I got to the Windows Management side of things.

• This smb.conf global entry was created using the referenced wiki.samba.org links, as well as referencing a smb.conf file from a FreeNAS server.

[global]
        workgroup = DOMAIN1
        security = ADS
        realm = DOMAIN1.TLD
        idmap config *: backend = tdb
        idmap config *: range = 3000-7999
        idmap config DOMAIN1: backend = rid
        idmap config DOMAIN1: range = 10000-999999
        idmap config DOMAIN2: backend = rid
        idmap config DOMAIN2: range = 1000000-9999999
        allow trusted domains = yes
        winbind refresh tickets = Yes
        vfs objects = acl_xattr
        map acl inherit = Yes
        store dos attributes = Yes
        username map = /etc/samba/user.map

• Create file /etc/samba/user.map with the following

!root = DOMAIN1\michael.mast

• Start services

sudo systemctl enable --now smb
sudo systemctl enable --now nmb

sudo smbcontrol all reload-config

• At this point we want to make sure a domain security group can manage the share from a Windows server. In my case I created a linuxadmins group.

net rpc rights grant "DOMAIN1\lunixadmins' SeDiskOperatorPrivilege -U'DOMAIN1\michael.mast'

However, at the time of this writing I am unable to get this to work. Getting the following error

Enter DOMAIN1\michael.mast's password:
Could not connect to server 127.0.0.1
The username or password was not correct.
Connection failed: NT_STATUS_LOGON_FAILURE

windbind

Notes for using winbind instead of SSSD.

sudo yum -y install samba-winbind samba-winbind-clients pam_krb5
sudo authconfig \
--enablekrb5 \
--krb5kdc=domain1.tld \
--krb5adminserver=domain1.tld \
--krb5realm=DOMAIN1.TLD \
--enablewinbind \
--enablewinbindauth \
--smbsecurity=ads \
--smbrealm=DOMAIN1.TLD \
--smbservers=domain1.tld \
--smbworkgroup=DOMAIN1 \
--winbindtemplatehomedir=/home/%U \
--winbindtemplateshell=/bin/bash \
--enablemkhomedir \
--enablewinbindusedefaultdomain \
--update

sudo net ads join -U michael.mast
sudo systemctl enable --now winbind