PowerCLI Powerhsell

Installation

Allow powershell to run powercli cmdlets

Set-ExecutionPolicy RemoteSigned
Install-Module -Name VMware.PowerCLI

Horizon

It looks like vmware relies on the API to do most of the work with horizon. If you are not familiar with working with the API, like myself, this requires you to install additional scripts from github. In my case I had to change the execution policy to unrestricted as the vmware.hv.helper module was not signed. Fun stuff.

Installation

After downloading the zip from github, extract and copy the modules to "C:\Program Files\WindowsPowerShell\Modules". At which point you can import the help

PS C:\Windows\system32> Connect-HVServer -server localhost
...
PS C:\Windows\system32> Import-Module VMware.Hv.Helper
Import-Module : Errors occurred while loading the format data file:
...
The file C:\Program Files\WindowsPowerShell\Modules\VMware.Hv.Helper\VMware.HV.Helper.format.ps1xml is not digitally signed. You cannot run this script on the current system. For more information about running scripts and setting execution polic
...
PS C:\Windows\system32> Set-ExecutionPolicy unrestricted
...
PS C:\Windows\system32> Import-Module VMware.Hv.Helper
...
PS C:\Windows\system32> Import-Module VMware.Hv.Helper
PS C:\Windows\system32> get-hvhealth


Id                 : VMware.Hv.ConnectionServerId
Name               : VCS-01
Status             : OK
Version            : 7.7.0
Build              : 11038474
ConnectionData     : VMware.Hv.ConnectionServerHealthConnectionData
DefaultCertificate : False
CertificateHealth  : VMware.Hv.CertificateHealthData

Id                 : VMware.Hv.ConnectionServerId
Name               : VCS-02
Status             : OK
Version            : 7.7.0
Build              : 11038474
ConnectionData     : VMware.Hv.ConnectionServerHealthConnectionData
DefaultCertificate : False
CertificateHealth  : VMware.Hv.CertificateHealthData

vcenter

Log into the server and start using commands

$cred=get-credential
connect-viserver -server localhost -credential $cred
get-vm

Add/Remove Hardware

Network Interfaces

The fun with this is that you can not remove a NIC from a running VM using powercli, or at least not in the way you would think. You actually need to rebuild the config with the changes you want then apply it back. Instead of doing this I decided to just disconnect the unwanted NIC and install the desired one. Thankfully this is in a DHCP environment so no modifications needed in the guest OS.

The reason for this change was due to Windows VMs losing connectivity to domain traffic using the emulated Intel NIC. According to our MS rep, we needed to change the NICs from e1000 to vmxnet3.

connect-viserver -server localhost
$list=get-vm
foreach ($i in $list){
$type=$i | Get-NetworkAdapter | select -ExpandProperty Type
if ($type -like "e1000"){
$i | get-networkadapter -name "Network adapter 1" | set-networkadapter -connected $false -startconnected $false -confirm $false
$i | new-networkadapter -networkname VDI -StartConnected -type vmxnet3}
}

RAM

Lets say you created a default config with 6GB of RAM because you were an ignorant moron, and now you need to increase this to a proper 8GB. The fun part is that the -MemoryGB option does not autofill, so you would be hard pressed to find this option without the Google. Gotta love Linux man pages!

Get-Folder -Name <your folder>| get-vm | where {$_.MemoryGB -eq "6.00"} | Set-VM -MemoryGB 8 -confirm:$false

Clone VM

new-vm -name <new_machine_name> -vm <source_machine_name> -vmhost <ip or host name of the physical host, not the controller>

Sample Script : format is <scriptname>.ps1 <number of VMs to make>
ie clone_vm.ps1 3

#######################################################################
###08-14-2017
###Specified the datastore to use because vmware is stupid, and was
###putting the VMs in the swap volume. Idiots.
#######################################################################
$num1 = Read-Host -Prompt "How many VMs? "
#Athenticate
$cred=get-credential
connect-viserver -server localhost -credential $cred

#Check for enough space
$neededspace=([int]$num1 * '<space needed for each VM>')
$space12=(datastore -Name <datastore name> | Select-Object FreeSpaceGB | ForEach-Object { $_.FreeSpaceGB })
if ( $space12 -lt $neededspace ){
echo "Not enought space, $space12 is available and you need $neededspace"
exit
}
#The following assumes you are creating VMs with an incrementing name based on a [a-z]+-[a-z]+-[0-9]+ format.
#Get last VM created for incremental creation
get-folder -name <folder name> | get-vm | select name > C:\powercli\outtest
$vms=(Get-Content C:\powercli\outtest | %{"$($_.Split('-')[2])"})
$base=0
foreach($line in $vms){
if ([int]$line -gt [int]$base){
$base=$line
}
}
$base = [int]$base + 1
$num453=0
Do{
$usehost=(Get-VMHost | Get-Random)
new-vm -name vm-name-$base -vm clonefromthis -VMHost $usehost -Datastore <datastore to be used> -RunAsync -WhatIf
$num453=[int]$num453 + [int]1
}until ([int]$num453 -eq [int]$num1)

Delete VM

remote-vm -vm <namme_of_vm> -deletepermanently  -confirm:$false

Shutdown / Start VM

To shutdown and start VMs

Get-Folder -Name pool02 | get-vm | where {$_.MemoryGB = "6.00"} | Shutdown-VM -Confirm:$false
Get-Folder -Name <your folder> | get-vm | Start-VM -Confirm:$false

Snapshot Management

This will create snapshots and remove any from a month ago.
TODO:Update to remove any older than a month. Also need email notification of failed attempts

#################################################
##For creating a snapshot every week, and
##removing snapshots older than a month.
#################################################
$newdate=date -Format MMddyyy
$olddate=date (date).addmonths(-1) -Format MMddyyy
$vsipass= echo 'password' | ConvertTo-SecureString -AsPlainText -force
$cred=New-Object System.Management.Automation.PSCredential -ArgumentList username,$vsipass
Connect-VIServer -server localhost -Credential $cred
##Create new snapshots
Get-VM | New-Snapshot -Name "vsi-$newdate" -RunAsync -whatif
##Delete old snapshots
$vsisnapshots=Get-VM | Get-Snapshot
if ($vsisnapshots.Name -like "vsi-$olddate"){$_.Name | remove-Snapshot -RunAsync -whatif}
Remove-Variable newdate
Remove-Variable olddate
exit 0
##Check logs
sleep -Seconds 3600
get-vmhost | Get-Log -Key vmkernel | select $_.Entries -ExpandProperty Entries | where {$_ -like '*Failed*snapshot*'}