VDO

Purpose

General notes on using VDO

Encryption with LUKS

This is a work in progress as my test backup drive keeps getting corrupted.

• Working with a 2TB external disk
• Created GPT table on disk (in this example /dev/sde) using parted, then created partition using gpart that used all available space.
• Setup encryption

[root@natasha ~]# cryptsetup luksFormat /dev/sde1

WARNING!
========
This will overwrite data on /dev/sde1 irrevocably.

Are you sure? (Type uppercase yes): YES
Enter passphrase for /dev/sde1: 
Verify passphrase: 

• Open the encrypted volume, and setup VDO.

[root@natasha ~]# cryptsetup luksOpen /dev/sde1 enc_backup
Enter passphrase for /dev/sde1:

[root@natasha ~]# vdo create --name=backup_vdo --device=/dev/mapper/enc_backup --vdoLogicalSize=4T
Creating VDO backup_vdo
      The VDO volume can address 1 TB in 1022 data slabs, each 2 GB.
      It can grow to address at most 16 TB of physical storage in 8192 slabs.
      If a larger maximum size might be needed, use bigger slabs.
Starting VDO backup_vdo
Starting compression on VDO backup_vdo
VDO instance 0 volume is ready at /dev/mapper/backup_vdo

• Create LVM partition

[root@natasha ~]# pvcreate /dev/mapper/backup_vdo 
  Physical volume "/dev/mapper/backup_vdo" successfully created.
[root@natasha ~]# vgcreate backup /dev/mapper/backup_vdo 
  Volume group "backup" successfully created
[root@natasha ~]# lvcreate -l 100%VG backup --name backuptest
  Logical volume "backuptest" created.
[root@natasha ~]# mkfs.ext4 -E nodiscard /dev/mapper/backup-backuptest 
mke2fs 1.45.4 (23-Sep-2019)
Creating filesystem with 1073740800 4k blocks and 268435456 inodes
Filesystem UUID: 30475cde-9f57-4a6f-8067-8dbbcbef127f
Superblock backups stored on blocks: 
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 
        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 
        102400000, 214990848, 512000000, 550731776, 644972544

Allocating group tables: done                            
Writing inode tables: done                            
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: done 

Grow Logical VDO Size

I have a SAMBA share used to mirror a directory from another server. This was intended to test VDO. The problem is that the kernel reports the disk is now full, but the physical usage is no where near full.

• Size of the disk.

sudo lsblk /dev/nvme2n1
NAME       MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
nvme2n1    259:3    0   300G  0 disk
└─datafeed 253:0    0 295.4G  0 vdo  /mnt/data

• Here I am told the mount point is full.

sudo df -hT /dev/mapper/datafeed
Filesystem           Type      Size  Used Avail Use% Mounted on
/dev/mapper/datafeed xfs       296G  296G  160K 100% /mnt/data

• But when checking vdo stats, we see it very much empty

sudo vdostats --human-readable
Device                    Size      Used Available Use% Space saving%
/dev/mapper/datafeed    300.0G     80.3G    219.7G  26%           74%

• Now I grow the logical volume size

sudo vdo growLogical --name=datafeed --vdoLogicalSize=500G
sudo lsblk /dev/nvme2n1
NAME       MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
nvme2n1    259:3    0  300G  0 disk
└─datafeed 253:0    0  500G  0 vdo  /mnt/data

• Grow XFS and check changes

sudo xfs_growfs /dev/mapper/datafeed
.........
sudo df -hT /dev/mapper/datafeed
Filesystem           Type  Size  Used Avail Use% Mounted on
/dev/mapper/datafeed xfs   500G  296G  205G  60% /mnt/data